Champion Power Equipment C90006 - Manual (Page 2)

1
INTRODUCTION
Congratulations on your purchase of Champion Power Equipment ATV Baskets. CPE designs and
builds these baskets to strict specifications. With proper use and maintenance it should bring you
years of satisfying service.
WARNING Read, study, and follow all instructions before using these devices. Failure
to heed these instructions may result in personal injury and/or property damage.
REAR BASKET
Assembly Instructions:
1. Position the basket so it is centered on the rear rack of the ATV and the O.E. rack upright fits
through the basket opening. Note, depending on the size and type of the rack upright, it may have
to be removed before the basket can be installed.
2. Place and stick self-adhesive pads (included) between basket and ATV rack to prevent
scratching.
3. Using (2) mounting brackets,(2)M6x75bolts,(2) Nylon nuts and (4) flat washers, secure the basket
to the ATV rack, as shown. Assure the bracket on top of the basket is positioned over the square
tubing of the basket frame and the bolts are installed on both sides of the tube. Note as the bolt is
tightened the expanded metal will deform.
4. Repeat step 2, three more times. Space the mounting brackets evenly over the surface of the
basket. Check basket for alignment and assure it is securely fastened. Tighten fasteners as
needed.