Chandler Limited Germanium Drive - Manual (Page 3)

OPERATION-
IN- connects to guitar, bass, or keyboard.
OUT- connects to amplifier or other source such as computer input.
BYPASS SWITCH- true bypass, full bypass, or hardwire bypass whichever term you like!
POWER-
BATTERY USE-
There are two battery clips on the inside of the unit. Four screws on the side panel must be removed
to change the battery. Please use a phillips screwdriver with a proper fit to avoid stripping the
screws.
Dimensions 5.7” x 3.45”
GERM DRIVE-
This is the amount of gain you can select from the pedal. Depending on the Feedback/Bias setting
you can get as much as 37db of boost. The Colored Boost Control is not linear in its sound. The
pedals gets brighter as you boost more. You will find it important to use the Boost Range in
conjunction with boost to tailor your sound to your needs.
BOOST RANGE-
Select the frequency response of the pedal here. This is at the beginning of the pedal circuit to keep
the sound as focused as possible.
HIGHs- Similar to old school treble boosters. Just the high frequency is boosted.
MIDs- A broader range treble boost adding in high mid range and just a touch of low mid range.
FULL- The widest range boost. Boost covers the low mid and into the low frequency.
We left out just enough of the lows to keep the sound tight. This is also a great setting for bass
and keyboards.
The Germanium Drive pedal runs on any two separate 9-volt “BOSS” style power supplies or two
9-volt batteries. Only use power supplies with the following polarity symbol.
Four screws on the side panel must be removed to change the battery. Batteries not included.