Warning, Caution, Oil and fuel information – Craftsman 9096-31B202 316350840 User Manual

Page 9

Advertising
background image

OIL AND FUEL INFORMATION

NOTE: Dispose of the old fuel/oil mix in accordance to

Federal, State and Local regulations.

OIL AND FUEL MIXING INSTRUCTIONS

Old and/or improperly mixed fuel are the main reasons for
the unit not running properly. Be sure to use fresh (less
than 60 days old) clean unleaded fuel. Follow the instruc-
tions carefully for the proper fuel/oil mixture.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxy-
genates such as ethanol, methanol, or MTBE (ether).
Alcohol-blended fuel absorbs water. As little as 1% water
in the fuel can make fuel and oil separate and lead to for-
mation of acids during storage. When using alcohol-
blended fuel, use fresh fuel.

Using Blended Fuels

If you choose to use a blended fuel, or its use is unavoid-
able, follow recommended precautions:

• Always use the fresh fuel mix explained in your opera-

tor's manual

• Always shake the fuel mix before fueling the unit

• Drain the tank and run the engine dry before storing the

unit

Using Fuel Additives

The bottle of 2-cycle oil that came with your unit contains
a fuel additive which will help inhibit corrosion and mini-
mize the formation of gum deposits. It is recommended
that you use our 2-cycle oil with this unit.

If unavailable, use a good 2-cycle oil designed for
air-cooled engines along with a fuel additive, such as
STA-BIL

®

Gas Stabilizer or an equivalent. Add 0.8 oz.

(23 ml.) of fuel additive per gallon of fuel according to the
instructions on the container. NEVER add fuel additives
directly to the unit's fuel tank.

To Obtain Correct Fuel Mix:
Thoroughly mix the proper ratio of 2-cycle engine oil with
unleaded gasoline in a separate fuel can. Use a 40:1
fuel/oil ratio. Do not mix them directly in the engine fuel
tank. See the table below for specific gas and oil mixing
ratios.
NOTE: One gallon (3.8 liters) of unleaded gasoline mixed

with one 3.2 oz. (95 ml.) bottle of
2-cycle oil makes a 40:1 fuel/oil ratio.

UNLEADED GAS

2 CYCLE OIL

1 GALLON US

(3.8 LITERS)

3.2 FL. OZ.

(95 ml)

1 LITER

25 ml

+

MIXING RATIO - 40:1

Add fuel in a clean,
well ventilated out-

door area. Wipe up any spilled fuel immedi-
ately. Avoid creating a source of ignition for
spilled fuel. Do not start the engine until fuel
vapors dissipate.

WARNING:

Gasoline is extreme-
ly flammable. Ignited

Vapors may explode. Always stop the engine
and allow it to cool before filling the fuel
tank. Do not smoke while filling the tank.
Keep sparks and open flames at a distance
from the area.

WARNING:

Remove fuel cap
slowly to avoid injury

from fuel spray. Never operate the unit without
the fuel cap securely in place.

WARNING:

For proper engine
operation and maxi-

mum reliability, pay strict attention to the oil
and fuel mixing instructions on the 2-cycle
oil container. Using improperly mixed fuel
can severely damage the engine.

CAUTION:

9

Advertising