Bounty Hunter DISCOVERY 3300 - Manual (Page 7)

7
QUICK-START DEMONSTRATION
I. Supplies Needed
• A Nail • A Quarter
• A Pull-Tab from a beverage can • A Zinc Penny (dated after 1982)
II. Position the Detector
a. Place the detector on a
table, with the search coil
hanging over the edge.
(or better, have a friend
hold the detector, with
the coil off the ground)
b. Keep the search coil
away from walls, floors,
and metal objects.
c. Remove watches, rings and other jewelry or metal objects from
hands and wrists.
d. Turn off appliances or lights that cause electromagnetic
interference.
e. Pivot the search coil back
toward the detector body.
III. Power Up
Press the POWER touch pad.
IV. Wave each Object over the
Search Coil
a.Notice a different tone for each object.
Bass Tone: Nail
Low Tone: Pull-Tab
Medium Tone: Zinc Penny
High Tone:
Quarter
b.Motion is required. Objects
must be in motion over the
search coil to be detected.
V. Press the DISC A-M touch pad
The detector will beep twice
and 3 “R”’s will appear under
the iron indicators.
Quick-Start Demo continued
on next page