CyberResearch RS-232 - Manual (Page 18)

COMT 366 Series CyberResearch
®
Serial Communications
10 ©Copyright 2001 CyberResearch, Inc.
7.0 Power
The COMT 366 can be either host or self powered. In the self-powered mode, a wall-
mounted transformer supplies low voltage AC and the required +12, -12, and +5 Volts
are generated internally. For COMT 366, supply +12 volts on Pin 9.
7.1 COMT 366
The COMT 366 is powered by a small, wall-mounted transformer that supplies 12 VDC
@ 500 mA. The transformer must be connected to the COMT 366 through the 1.3mm
connector located on the side of the unit before plugging the transformer into the wall.