Cambridge SoundWorks I525 - Manual (Page 12)

VOLUME
SNOOZE
MUTE
TUNE
1 2
SOURCE
SELEC T
NAP SLEEP
SEEK
2 3
5 6 7
4
8
1
PRESETS
MENU
ENTER
SURROUND CRYSTALIZER SMART VOL
iPod
1
iPod Operation
Using the iPod dock feature of the i525
1) There is a selection of inserts included with
the i525. These inserts fit various iPod models.
Install the insert that best fits your iPod, or use
the insert included with your Apple iPod.
Make sure the insert snaps into the recess. The
top of the insert should be flush with the top of
the i525.
2) Attach your iPod to the dock connector.
3) Select the iPod as a music source by pressing
PLAY / PAUSE (remote or top panel).
4) Use the iPod navigation buttons on the remote
control to operate your iPod while it is docked
in the i525.
Notes:
To wake a hibernating iPod, push PLAY / PAUSE on
the i525 remote control or top panel.
The i525 will not control a connected iPod while
the i525 is in STANDBY.
The i525 controls iPod functions of a docked
iPhone or iPod touch. After docking one these
models, it may be necessary to manually “unlock”
and select the iPod function before the i525 remote
control can be used.
1) Install the dock insert that fits your iPod.
2) Connect your iPod.
3) Select Play / Pause
4) Use these iPod buttons to
operate your iPod.
i525 Remote Control
SOURCE PRESET
1-8
1 2
MENU
SELECT
SNOOZE / MUTE
SLEEP
NAP
TUNE
i525 Top Panel
MEN U