Adjusting the bin/shelf glides, Adjusting the refrigerator shelves, Removing the meat drawer and cover – Whirlpool 6ET18DK User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
Adjusting the bin/shelf glides
The bin/shelf glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along bin/track.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove glass shelves;
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace glass shelves;
1. Guide the rear shelf hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into slots.
Lower front of shelf to level position.
Glass shelves are heavy.
Be careful.
Removing the meat drawer and cover
To remove the meat drawer;
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover;
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
4. Replace cover in reverse order.
Pull out to the stop, lift
the front and pull again.