Normal fill position, Maximum fill position, Setting the water level adjustment – Whirlpool TD2500XF0 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NOTE: Do not operate your dehumidifier in
temperatures beiow 65°F (18.3°C). The coii
may become iced over at iow temperatures
and the unit wiii not operate properiy.
3. If you need more dehumidification, turn
control clockwise. Unit will run continuously
at DRYEST setting. If you need less dehu
midification, turn control counterclockwise.
PAN FULL
O
HUMIDISTAT
4.
Stop the unit manually by turning the control
to OFF.
Setting the water level adjustment
The Water Level Adjustment can be set in two
positions to turn off the unit automatically when
the pan is full. This prevents the danger of
overflow.
Pan must be in proper position for Water
Levei Controi Switch to work.
The Water Level Control Switch will automati
cally turn off the dehumidifier at the fill level
you selected when pan is properly placed.
Loosen the screw to move the Water Level
Adjustment. Retighten screw when adjusted.
NORMAL FILL POSITION
Set Water Level Control Lever to the indenta
tion on the left side. The water pan and water
will weigh approximately 16 lbs. (7.2 kg) and
water pan will be
'/2
full.
MAXIMUM FILL POSITION
Set Water Level Control Lever to the raised
area on the right side. The water pan and
water will weigh approximately 24 lbs. (10.8 kg)
and water pan will be y4 full.