Whirlpool RT14ZK - Manual (Page 10)

U S I N G Y O U R R E F R I G E R A T O R
Adjusting the refrigerator shelves
Adjust shelves to match the way you use
your refrigerator.
To remove a shelf:
1. Remove all items from the shelf.
2. Slide shelf straight out to the stop.
3. Lift the front.
4. Slide shelf out the rest of the way.
To replace a shelf:
1. Fit back of shelf on top of shelf guide with
wire stops on the bottom of the guide.
2. Lift front of shelf.
3. Slide shelf in until it clears all stops.
4. Lower front of shelf into place.
Shelf stop
Guide stop
Shelf guide
Removing the crisper and cover
To remove the crisper:
1. Slide crisper out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lift the front, then the back.
2. Lift cover up and out.
To replace the cover:
1. Fit notches in back of cover into the nubs
at the rear of the refrigerator cabinet.
2. Lower front into place.
Using the ice cube trays
If you don’t use cubes, they may shrink. The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller
they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
10
CAU.;a
WITH QUESTIONS OR COMMENTS