Adjusting the oven temperature control – Whirlpool RB1005XY User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R O V E N
Adjusting the oven temperature control
Oven temperature controls will gradually shift
after years of use. So, even though your new
oven is properly adjusted to provide accurate
temperatures, it may cook faster or slower than
your old oven.
If, after using the oven for a period of time, you
are not satisfied with the temperature settings,
you can change them by following these steps:
1. Make sure
the Oven Temperature Control
Knob is turned to the off position.
Pull
knob
straight off and
flip
it over.
2. Loosen
the locking screws inside the control
knob.
Note the position of the notches.
3. To lower the temperature, hold
knob handle
firmly and
move
the tooth a notch
counter
clockwise.
Each notch equals about 5°F
(2.5°C).
4. To raise the temperature, hold
knob handle
firmly and
move
the tooth a notch
clockwise.
Each notch equals about 5°F (2.5°C).
5. Tighten
the locking screws and
replace
the
control knob.
Locking
screws
Tooth
To raise
To lower
Notches
10