Changing a cycle setting, Changing a drying option – Whirlpool 8500 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD
□
Ain
HEAT
DRY
DRY
□□
Changing a cycle setting
You can change a setting anytime during any
cycle.
1. Lift up on the door latch to unlatch the door and
stop the cycle. Do not open the door until the
spray arms stop spinning.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle. When changing the
dial from LIGHT WASH to POTS & PANS, or
NORMAL WASH setting, detergent is released.
Reload covered section of dispenser before
starting Pots & Pans or Normal Wash Cycles.
4. Close and latch the door. The dishwasher will
automatically start the new cycle.
Changing a drying option
If you want to change the selected drying option,
push the other Options button.