Stopping/restarting your washer – Whirlpool 3363562 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
O P E R A T I N G Y O U R W A S H E R
5. Push in Cycle Control Knob and turn it
clockwise to the wash cycle you want.
See page 7.
6. Pull out Cycle Control Knob to start
washer.
7. (OPTIONAL STEP) If desired, add
measured liquid chlorine bleach after
the washer starts agitating. See
page 11.
8. (OPTIONAL STEP) If desired, add
measured and diluted liquid fabric
softener to the final rinse cycle. See
page 11.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if
necessary) and pull out the Cycle Control
Knob.
Advertising