Whirlpool 1982 - Manual (Page 4)

TO REMOVE OVEN DOOR
(NON-SELF-CLEANING MODELS)
With the door off, you will notice how the ends of the
hinges slide into slots at the bottom corners of the door.
To put the door back on, fit both bottom corners of the
door over the ends of the hinges. Push the door down
evenly, so neither corner gets ahead of the other. When it
reaches the bottom, you can close the door. A safety
latch will hold the door open until it is on correctly.
4. CHECKING
CAUTION: Do not touch the elements. They may be
hot and you may get burned.
A. THERMOSTAT
1. Broil — Turn selector switch to BROIL and set
thermostat to a high temperature position. The top
element should become cherry-red and the indicator
light should glow.
2. Bake — Turn selector switch to BAKE and set
thermostat to 350°. The bottom element should
become red and the indicator light should glow.
B. CLOCK
Refer to the Use and Care Guide for proper operation of
the clock.
C. ROTISSERIE (if optional kit has been installed)
1. Position the spit bar on special rack.
2. Insert the point of spit bar into hole in the back of the
oven.
3. Rotation starts upon insertion of spit bar.
Pull straight with the
angte of part-open door.
Push down eventy.
Removing the oven door: (For installing and cleaning)
Removing the oven door may make it easier to clean the
oven. To remove the door, first open it to the first stop
(about 4 inches or 10 cm). Take hold of both sides of the
door near the top; then lift it at the same angle it is in.
FRANCHISED SERVICE
In the event your WHIRLPOOL appliance should need service, call the dealer from whom
you purchased the appliance or a WHIRLPOOL franchised TECH-CARE® service company.
He is in the Yellow Pages of your telephone directory listed under "Appliances-Household-
Major - Service and Repair." You can also obtain his name and number by dialing, free, within
the continental United States the Whirlpool COOL-LINE® Service (800) 253-1301. When
calling from Michigan, dial (600) 632-2243; from Alaska or Hawaii, dial (800) 253-1121.
Dial just as you normally dial long distance. A special operator will tell you the name and
number of your nearest Whirlpool TECH-CARE service outlet. During normal working hours.
Whirlpool consultants at this same number will also answer any questions about operating or
maintaining your appliance not covered in your Use and Care Guide.
Learn the benefits of using TECH-CARE service for maintaining the quality originally built
into your WHIRLPOOL appliance.
[- 'Whirip^l
recM-cAef
FKAWCMISED Sf KVICt
WHIRLPOOL CORPORATION BENTON HARBOR, MICHIGAN 49022
Part No. 311434 Rev. D