Whirlpool 3360464 - Manual (Page 11)

OPERATING YOUR WASHER
Using the fabric softener dispenser
1. Add detergent and load clothes into
the basket.
2. Pour liquid fabric softener into the dis­
penser using the amount recommended
on the package. Avoid dripping or spilling
any fabric softener on the load.
3. Dilute fabric softener with warm water.
Fill dispenser with warm water until liquid
reaches the opening.
4. Start the washer. Diluted fabric softener
will be added to the load during the final
rinse.
NOTE:
Do not stop the washer before the
rinse part of the cycle begins. Staining
can occur.
5. Flush dispenser periodically with warm
water.
NOTE:
Do not wash clothes with this
dispenser removed. Do not add detergent or
bleach to dispenser. The dispenser is for
liquid fabric softener use only.
Adding liquid chlorine bleach
Always measure liquid chlorine bleach. Do
not guess. Never use more than 250 mL
(1 cup) for a full load. Use less with lower
water level settings. Follow manufacturer’s
directions for safe use. Use a cup with a
pouring spout to avoid spilling.
1. Let the washer fill and begin agitating
the load.
2. Add bleach to wash cycle so it can be
removed in the rinse cycle. Pour bleach
around agitator, not directly on load.
• Follow directions on care labels. Do not
use chlorine bleach on wool, silk,
spandex, acetates, or some flame-
retardant fabrics.
• When soaking with chlorine bleach, add
detergent to soak water.
NOTE:
Undiluted bleach will damage any
fabric it touches. The damage appears as
rips, holes, tears, or color loss and may not
show up until several washings later.
11