Whirlpool RB260PXY - Manual (Page 24)

U S I N G Y O U R O V E N
7. Use the Hour and Minute pads to set the
desired stop time. Push the “up" (A) or “down”
(T) pad(s) until the correct time shows in the
display.
This example shows a desired stop time of
2:30. This provides a cook time of 30 minutes
(the difference between the start and stop
times).
NOTE: If you do not set a stop time, the colon
will flash in the display and STOP and COOK
will flash alternately to remind you to program
a stop time or a cook time. (See page 21 for
instructions on how to set delay start and stop
automatically using Cook Time and Start
Time.)
Push the Start/Enter pad. DELAY and BAKE
will light up in the display to indicate that the
oven is programmed to start at a later time.
NOTE: The display will show “door” and a tone
will sound once a minute for 5 minutes if the
door is latched when you try to bake/roast.
You can change the temperature or time
settings any time after pushing the Start/Enter
pad by repeating just Steps 3 through 7.
HOUR MINUTE
■| r rr
3 u
9. When the start time is reached, a one-second
tone will sound and DELAY will go off. The
display will show the set cook time. “Lo°”,
HEAT, TIMED and BAKE will light up in the
display to show that the oven is heating. The
display will count down the baking/roasting
tirrra in minutes.
10. When the baking/roasting time is completed,
the oven will turn off automatically, beep four
times and “End” will show in the display. You
will also hear four 1 -second tones every
minute until you push the Off/Cancel pad.
NOTE: To disable reminder tones, push and
hold the Cook Time pad for 4 seconds. To
reactivate tones, repeat this procedure.
To cancel the MEALTIMER"* control setting:
• Push the Off/Cancel pad to return the display to
the time of day.
24