Whirlpool ET22ZM - Manual (Page 9)

Cleaning chart...
Part What to use
Removable parts Sponge or cloth; mild
(shelves, crispers, meat detergent and warm water
pan, etc.)
Outside
Inside walls (Freezer
should be allowed
to warm up so cloth
won't stick,]
Door liners and
gaskets
Dark plastics (covers,
panels and door bins)
Defrost pan
Condenser coils
Floor under
refrigerator
Sponge, cloth or paper towel;
mild detergent;
appliance wax (or good
auto paste wax),
Sponge, soft cloth or paper
towel, baking soda, warm
water, mild detergent.
How to clean
• Wash removable parts with warm water
and a mild detergent.
• Rinse and dry.
• Wash with warm water and a mild
detergent Do not use abrasive or harsh
cleansers.
• Rinse and dry,
• Wax painted metal surfaces at least twice
a year with appliance wax or a good auto
paste wax. Apply wax with a clean, soft
cloth
Do not use wax on plastic parts.
• Wash with warm water and
- mild detergent or
- baking soda (2 tablespoons [26 g] to 1
quart [.95 I] warm water.
• Rinse and dry.
Wash with mild detergent and warm water.
Rinse and dry.
Sponge, soft cloth or paper
towel; mild detergent, warm
water,
DO NOT USE cleaning waxes, concentrated detergents, bleaches or
cleansers containing petroleum on plastic parts.
Mild detergent and warm
water; soft, clean sponge and
soft, clean cloth.
Sponge or cloth; mild
detergent and warm water
• Wash with a soft, grit-free cloth or sponge.
• Rinse and dry with a damp, grit-free cloth
or chamois.
DO NOT USE paper towels, window sprays, scouring cieansers, or flammable
or toxic solvents like acetone, gasoiine, carbon tetrachloride, etc. These can
scratch or damage the material.
Remove base grille. (See page 7.)
To remove defrost pan, lift pan over wire
brace (remove tape; if any).
Wash defrost pan with warm water and mild
detergent.
Rinse and dry.
Replace with notched corner to the rear
Push it all the way in.
Make sure defrost drain tube is pointing
into pan.
Replace base grille.
Vacuum cleaner; using the
extended narrow attachment.
Usual floor cleaners.
Remove base grille.
Clean dust and lint from condenser at least
every other month.
Replace base grille.
Roll refrigerator out only as far as water
supply line allows.
Wash floor
Roll refrigerator back into place.
Check to see if the refrigerator is level.