Rq ||0, Vji^j, The anti-tip bracket – Whirlpool FEP310Y User Manual

Page 16: Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

The anti-tip bracket

The range will not tip during normal use. However, tipping can occur if you apply too much

force or weight to the open door without the anti-tip bracket properly secured.

^WARNING

rQ||0

1

Personal Injury Hazard

• To reduce risk of range tipping over, secure range with a properly

installed anti-tip bracket supplied with range or an optional wall-

mounted anti-tip bracket kit.

• If range is moved for cleaning or service, check that anti-tip device

Vji^J

is engaged before using range.

Failure to follow the above precautions could result in personal injury.

To verify the anti-tip bracket is
engaged (if you have a floor

bracket):

• Remove

the storage drawer. (See page 15.)

• Look

to see if the anti-tip bracket is attached

to floor with screws.

• Make sure

one rear leveling leg is positioned

under the anti-tip bracket.

• See

Installation Instructions for further details.

To verify the anti-tip bracket is

engaged (if you have a wall
bracket):

• Look

to see if the anti-tip bracket is attached

with screws to the wall behind the control

panel.

• Make sure

the cable on the back of the range

is secured by the two hooks on the bracket.

• Cable

must be unhooked from wall bracket to

move range for cleaning or service. Recon­

nect cable before using range.

• See

Installation Instructions for further details.

Rear
leveling
leg

Floor bracket

, Cable

(attached

to rear of
control

panel)

Wall bracket

16

Advertising