Using your freezer – Whirlpool EV130fxk User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using your freezer

Setting the Cold Control...

To start, turn control to the middle of the dial.

This setting will maintain zero zone temperatures
under normal operating conditions.

Adjusting Cold Control...

• Turn control to higher number for colder

temperatures.

• Turn to lower number for less cold temperatures.

Cooling Freezer First...

• Allow freezer to cool 6 to 8 hours before filling

with frozen food.

• Let it cool overnight before adding large

amounts of unfrozen food.

• Frost V, ill form on the shelves. It will form first and

be heavier on the top shelves.

Note: Wien freezer is first started the compressor
will run constantly until the cabinet is cooled. It
may tal< e up to 6 to 8 hours or longer, depending
on room temperature and the number of times

the free,:er door is opened.

Aftert le cabinet is cooled the compressor will

turn on and off as needed to keep freezer at

proper temperature.

The Power Saving Control...

operctes electric heaters. These heaters help

prevent moisture from forming on the outside of

the free,:er when humidity is high.

• Use th e OFF setting when humidity is low to save

electricity.

• Use CN only if moisture forms on outside of

freezer.

Bottom Trivet...

To remove:

• Lift up, then pull out.

To replace:

• Set in bottom of freezer.

• Push into place.

Lift up

Then out

Advertising