Whirlpool ET18PK - Manual (Page 8)

U S I N G Y O U R R E F R I G E R A T O R
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed. If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 19.)
CONDITION: REASON:
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator Door opened often Refrigerator 6
Section is
TOO WARM Large amount of food added
Room temperature too warm Freezer D
If Freezer Door opened often Refrigerator 4
Section is
TOO WARM Large amount of food added
Very cold room temperature
(can’t cycle often enough) Freezer A
If Refrigerator Controls not set correctly Refrigerator 2
Section is
TOO COLD for your conditions Freezer A
If ICE isn’t Heavy ice usage Refrigerator 4
MADE FAST
ENOUGH Very cold room temperature
(can’t cycle often enough) Freezer A
If BOTH Door opened often Refrigerator 6
SECTIONS
are TOO WARM Large amount of food added
Very warm or very cold room
temperatures
Freezer C
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Support button