CREATIVE Zen Vision Cell Phone - Manual (Page 41)

Transferring and Managing Content 41
Using FM Radio
Listening to the radio
1 Make sure your earphones are connected to your player when scanning for radio stations.
The earphone cable acts as an antenna for radio reception.
2 In the main menu, Select FM Radio.
3 To automatically scan and save radio stations, press the Options button and select
Autoscan.
The player scans for all radio stations with clear reception. At the end of the autoscan, Zen
Vision automatically saves all stations as preset channels and tunes in to the first preset.
4 Use the Up or Down navigation buttons to select a different preset.
Manually tuning or scanning for a radio station
1 Press the Left or Right navigation button to fine tune the radio frequency or
manually scan for a radio station.
2 Hold down the Left or Right navigation button for one second to scan for the next
available radio station.
3 To save a radio station as a preset, press the Options button, select Save as Preset.
You can also press and hold the OK button until the Save as Preset screen appears.
4 Select a preset number.
TIP If you are using the Zen Vision wired remote control, you can press the MODE button
to switch between the Now Playing and FM Radio screens.