Removing the meat drawer and cover, To remove the meat drawer, To remove the cover – Whirlpool RS20AK User Manual
Page 12: Adjusting the meat drawer temperature, Removing the freezer bin/basket, To remove the bin/basket, Adjusting the meat drawer, Temperature, Removing the freezer shelves
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
USING YOUR REFRIGERATOR
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer straight out to the
®*°P’
g^Qp
the front and pull again.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove the crisper, the crisper cover and
the meat drawer.
2. Tilt front of cover up.
3. Lift cover at back and pull straight out.
4. Replace in reverse order.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer
through an opening between the freezer and
the refrigerator. This helps keep the meat
drawer colder than the rest of the refrigera
tor for better storage of meats.
Slide the control to let more or less cold air
through.
Removing the freezer bin/basket
To remove the bin/basket:
1. Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bin/basket:
1. Place on the slides.
2. Make sure the wire stops clear the front
of the slides.
3. Slide in all the way.
Pull out to the stop,
lift the front and
pull again.
12