Using the chlorine bleach dispenser, Using the extra rinse option – Whirlpool 3360461 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OTHER FEATURES
Using the chlorine bleach dispenser
(on some models)
Always measure chlorine bleach. Do not guess.
Never use more than 1 cup (250 mL) for a full
load. Use less with lower water level settings.
Follow manufacturer’s directions for safe use.
Use a cup with a pouring spout to avoid spilling.
1. Load the washer.
2. Pour measured chlorine bleach carefully into
dispenser. Do not let bleach splash, drip or
run down into washer basket. Undiluted
bleach will damage any fabric it touches.
3. Start the washer. Bleach will be diluted
automatically during wash part of cycle.
NOTE: Do not add all-fabric bleach to the
dispenser. The dispenser can clog.
Using the extra rinse option
(on some models)
Some models offer an extra rinse in all cycles.
• Before a cycle starts, select Extra Rinse ON.
The washer automatically adds an extra
rinse and spin to the cycle.
• If no extra rinse and spin is desired, select
Extra Rinse OFF.
NOTE: On CLEAN TOUCH-^ models, the “On”
indicator appears when an Extra Rinse is
selected.
Extra rinse knob or Extra rinse pad
12