Whirlpool Generation + LB5500XL User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
temperature you want with the
TEMPERATURE SELECTOR. Rinse water is
cold in all settings.
You set the
LOAD SIZE SELECTOR
to fill the washer to the level that
matches the load.
You may notice that some of the
"SPINS" have
SPRAY RINSES. Cold water
s sprayed on the spinning load to help
rinse and remove detergent residue.
If you turn to a cycle and start
the washer, but change your mind, push
In on the Cycle Control Knob and turn
to the right [clockwise] to the setting you
want. Then pull out to start.
Advertising