Whirlpool 3VET16GK - Manual (Page 6)

BEFORE USING YOUR REFRIGERATOR
InstaSfing it properly
2 .
3.
5.
Allow 7.5 cm (3 inches) between overhead
cabinets and refrigerator top.
Allow at least 2.5 cm (1 inch) between the
refrigerator condenser on the back and the
wall.
Allow 1.25 cm
('/2 inch) on each side of the
refrigerator for ease of installation.
If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra
space so the door can be opened wider.
Level your refrigerator.
Leveling it
Your refrigerator has 2 front, adjustable
rollers to prevent rocking on uneven floors.
To adjust rollers:
1. Roll refrigerator into position.
2. Adjust rollers by turning the leveling
screws, located at the front of the base.
• Turn clockwise to raise.
• Turn counterclockwise to lower.
NOTE: Rollers are adjusted correctly
when the refrigerator no longer rocks
when the doors are opened or closed.
3. Repeat this procedure whenever the
refrigerator is moved.
NOTE: If you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.
Use a screw­
driver to adjust
Roller
Lower
Leveling screw
View of roller with hinge in place
Leveling
screw