Whirlpool EH18VSXL - Manual (Page 4)

Installing or
Replacing the Battery... Batlery
Clamp
9-Volt
Alkaline
Installing:
1. Move the Temperature Alarm Switch to OFF.
2. Pull top of Temperature Alarm small daar to­
ward you.
3. Attach 9-volt alkaline battery to connector.
4. Fit battery under clamp.
5. Push Temperature Alarm small door back into
place.
6 . Move the Temperature Alarm Switch ta the
TEST position. The alarm should sound.
7. Move the switch to OFF until the freezer is cold.
Then move the switch to ON.
Replacing:
1. Pull top of Temperature Alarm small door to­
ward you,
2. Oarefully pull the battery forward aut of the
clamp.
3. Unplug the battery.
4. Install a new 9-volt alkaline battery.
5. Replace the battery in the clamp.
6 . Push Temperature Alarm small door back info
place.
7. Test the battery.
8. Mave the Temperature Alarm Switch to ON.
The battery...
• A new alkaline battery should last about one year. Test the battery often.
• If the freezer femperature should become too warm, a new battery should sound the
alarm for about 48 hours.
• The "low battery" beep (chirp) should last about 7 days. Replace the failing battery
immediately. The beep (every 30 to 60 seconds) cannot be turned off.
• If you have been away from home for more than a day, always check your freezer and
TEST the battery.
Key Eject Lock...
The key eject lock can help reduce the hazdrd
of child entrapment.
To lock or unlock the freezer you must hold the
key in the lock while turning. The lock is spring
loaded so the key cannot be left in the lock.
If the key is lost, contact your WHIRLPOOL dealer
fora replacement.
4
Replacing Interior Light...
1. Unplug freezer.
2. Replace bulb with a 15-watt appliance bulb.
3. Plug in freezer.
Sliding Baskets...
can be moved from side to side when load­
ing or unloading food below it. The basket also
can be lifted out of the freezer completely.