Lint screen, Lint removal – Whirlpool LE9800XM User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lint screen
Clean the lint screen before each load. A screen blocked by I inf can
increase drying time and may be a FIRE FIAZARD
Open the lid and pull the lint screen
straight out.
O
DO NOT run the dryer with
the lint screen loose,
damaged or missing.
Doing so can cause over
heating, can damage fabrics and
can be a FIRE HAZARD.
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place
Lint removal
Lint can gather inside thedryerandcreateafi re hazard. This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.
• Avoid electrical shock
Al'Pl
hazard - unplug power
A
supply cord or turn oft
^
^ electrical power.
• Avoid injury or damage — do not
put hands inside cabinet.
• Make sure dryer is cool.
1. Remove back panel (electric) or
front panel (gas)
2. Avoid damaging wires,ther
mostats, funnel or igniter.
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and re
level dryer.