Whirlpool RT18BK - Manual (Page 11)

USING YOUR REFRIGERATOR
Removing the crispers and crisper cover
To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. For some models: Push up glass insert from
the bottom, then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back corner of cover frame into notch
supports on walls of refrigerator, then lower
front onto metal cover support.
3. For some models: Slide back of glass insert
into cover frame. Then lower front to level
position.
Pull out to
the stop, lift
the front
and pull
again.
Remove the
glass insert
Uft front of
cover frame,
then the back.
Removing the trivet and cover
( rtisek )
The trivet can be removed for easier cleaning.
To remove the trivet:
1. Lift trivet up and out.
2. Replace in reverse order. Be sure to replace
trivet with higher edge toward the rear of the
refrigerator.
To remove the cover:
1. Lift front of cover.
2. Lift cover up and out.
To replace the cover:
1. Fit cover notches into supports on walls of
refrigerator cabinet.
2. Lower the front into place.
1 1