Solving common ice maker/dispenser problems – Whirlpool 4YED27DQDN00 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Solving common ice maker/dispenser
problems

PROBLEM

CAUSE

SOLUTIONS

Ice dispenser

• Freezer door open

• Close the freezer door.

won’t work

• Ice bin not properly

installed

• Make sure bin is pushed in all the way.

• Wrong ice in bin

• Use only crescents from ice maker.

Shake the bin occasionally to keep cubes
separated and to increase storage room.

• Dispenser not used for

extended periods,
causing ice cubes to
melt together

• Dump old ice and make a new supply.

Ice dispenser

• Ice dispenser bar held

• Wait about 3 minutes for the dispenser

stops working

in too long

motor to reset.

• Large amounts of ice should be taken

from the bin, not through the dispenser.

Off-taste or

• Ice attracts airborne

• Dump old ice and make a new supply.

odor in ice

odors; old ice

Store excess ice in covered container.

• Water quality

• Water containing minerals (such as sulfur)

may require a filter to remove.

• Foods not properly

wrapped

• Wrap properly. See page 25.

• Ice bin and freezer may

• Clean freezer and ice bin. See cleaning

need cleaning

chart on page 21.

• Plumbing to ice maker

• Follow Installation Instructions for proper

ice maker water supply hookup. (See back
of refrigerator cabinet.)

• New ice maker

• The first few loads of ice from a new ice

maker may have an off-taste. Dump ice

and make a new supply.

18

Advertising