Cobra Digital DC5500 - Manual (Page 5)

1
1
2
3
4
Note: h
h
h
h
h
2
2.1
1
2
2.2
1
2
h
3
4 Press the card gently into the slot, it will “click” into place
Inserting a Memory Card
Always set USB mode according to your need BEFORE connecting to PC.
(See 3.9 PC Cam & 3.10 Mass Storage on P.13)
Insert a SD card into the slot in the indicated direction
Preparation For Use
Your Camera will be recognized as PC Cam or Mass Storage by your PC next time you
connect it via the USB cable provided (see 4 SETUP on P.13).
Double click "XXX" file and installation will start automatically.
Click "Complete" bottom in pop-up dialogue box to finish installation.
Loading Batteries
To remove a memory card press gently on the edge of the card to eject
Open the Battery Cover as shown
Load 3 AAA batteries with correct polarity as indicated inside Battery Cover “+ - +”
Open the Battery Cover as shown
Insert CD provided.
ALWAYS install driver BEFORE connecting to your PC for the first time.
Driver Installation
* Windows is a trademark of Microsoft Corp.
Contact pins first and label side facing LCD display
To use PC CAM function in any version of Windows*, you must install the
correct driver provided.
To use MASS STORAGE function, driver is needed for Windows* 98 SE. No
driver needed for Windows* ME, 2000, NT & XP.
Both PC CAM and MASS STORAGE functions are supported by
Windows* 98 SE and later versions of Windows*.