Stopping/restarting your washer, Selecting a cycle and time – Whirlpool LSC9355DQ0 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
7. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. See page 8.
Pull out the Cycle Control Knob to
start the washer.
9. (OPTIONAL STEP) If desired, add
measured liquid fabric softener to the
rinse water. See page 12.
NOTE: Your washer does not come with
a liquid fabric softener dispenser installed.
The dispenser is available with a mail-in
coupon packed wKh your washer.
Stopping/restarting your washer
• To
stop the washer at any time, push in
the Cycle Control Knob.
• To
restart the washer, close the lid (if
necessary) and pull out the Cycle Control
Knob.
Selecting a cycle and time
This section illustrates and describes the
wash cycles you can select with the Cycle
Control Knob. Use this information to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
• The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
• An Extra Rinse feature is available in all
cycles (see page 6).
• Refer to page 9 to learn more about the
sounds you may hear during a wash cycle.
• Refer to page 10 to help you understand
what happens during a wash cycle.
continued on next page
7