Hints for using the temperature probe do... don’t, Changing the temperature setting – Whirlpool MC8991XT User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

8. Touch START.

The Display will show "COOL" to
show the food is less than 90°F.
As the food cooks, the Display will

show the internal temperature of

the food for every 5°F increase.

C

_

- I

L I t U

When the probe senses the tempera­

ture you selected, the oven shuts off.
"End" will show on the Display and 4

beeps will sound. (You can stop the
beeping by opening the door or by

touching CANCEL.) "End” will remain
on the Display and a beep will sound
every 60 seconds (to remind you that
food is left in the oven) until the door is
opened or CANCEL is touched. The

Display will then show the time of day.

NOTE: “Err” will be displayed after START Is touched, if an incorrect temperature has been
selected (under 90°F or over 200°F).

Hints for using the temperature probe

DO...

DON’T...

' use hot pads when removing probe from

food or food from oven.

' stir foods during cooking when

recommended.

stir soups, casseroles and drinks before
serving.

cover roasts with foil and let stand a few

minutes after microwave cooking. Remove
foil if you decide to cook it longer,

remove the probe from the oven when not

cooking by temperature.

' let probe or probe cable touch any part of

the oven interior.

' let probe touch foil (if used). Foil can be kept

away from probe with wooden toothpicks.
Remove foil if arcing occurs,

use paper, plastic wrap or plastic containers.

They will be in the oven too long,

force probe into frozen foods,

use probe for foods that need to simmer.

NOTE: Some foods are started using a timed cycle and finished by using a temperature cycle. You
can set PROBE TEMP to follow COOK or QUICK DEFROST, to avoid the need to reset the oven half

way through cooking. PROBE TEMP can be programmed with the temperature probe out. The oven
will then pause between cycles. “Prob” will show on the Display to remind you to plug in the probe.

Touch START to continue cooking.

Changing the temperature setting

When using the Temperature Probe, PROBE TEMP settings can be changed before or during
operation.

-Touch PROBE TEMP
- Touch number for new temperature.
- Touch START. The oven will continue cooking to the new temperature. If the new temperature is

lower than the temperature of the food, the oven will shut off.

18

Advertising
This manual is related to the following products: