Whirlpool 8EDZOZK - Manual (Page 9)

Changing the control settings
If you need to adjust temperatures in refrigerator • Adjust the Refrigerator Control first,
or freezer, use the settings fisted in the chart • Wait at least 24 hours between adjustments,
below as a guide. If you have questions call our . ^^just the Freezer Control if needed.
Consumer Assistance Center number. (See
page 23.)
CONDITION: REASON:
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator Door opened often Refrigerator 4
Section is
TOO WARM
Large amount of food added
Room temperature too warm Freezer A
If Freezer Door opened often Refrigerator 3
Section is
TOO WARM
Large amount of food added
Very cold room temperature
(can't cycle often enough) Freezer C
If Refrigerator Controls not set correctly Refrigerator 2
Section is
TOO COLD for your conditions Freezer B
If ICE isn’t Heavy ice usage Refrigerator 3
MADE FAST
ENOUGH
Very cold room temperature
(can’t cycle often enough)
Freezer c
If BOTH Door opened often Refrigerator 4
SECTIONS
are TOO WARM Large amount of food added
Very warm or very cold room
temperatures
Freezer B
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove shelves:
1. Rennove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf up at back.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slots.
3. Lower front of shelf to level position.
NOTE: The above instructions apply to all
models in this manual (ED20PK wrth glass
shelves and ED20ZK and ED22ZR with wire
shelves).
Model ED20PK:
Glass shelves are
heavy. Be careful.