Operating instructions, The automatic cycles, Hmed drying – Whirlpool ELECTRIC LE5795XM User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operating instructions

The automatic cycles

The automatic cycles allow you

to select the degree of dryness you

prefer for the clothes being dried.

The Control Knob moves and stops

several times until the load reaches

the dryness setting you selected. Then

the knob automatically moves to
OFF and tumbling stops.

•wtomalte

r e Q u I a r c o o l d

Use

AUTOMATIC

REGULAR to
dry heavy

and medium-

weight cotton items. The load tum­

bles without heat during the iast 5

minutes.This helps make the load

easier to handle.

Use

AUTOMATIC

PERMANENT

PRESS to dry
permanent

press, knits and other synthetic fab­
rics. The load tumbles without heat
during the last 10 minutes. This helps

keep wrinkles from setting in.

Forthe first few loads,setthe Control
Knob to point to an* in either auto­

matic cycle. When the dryer stops,
feel the dried items.

If items ore drierthan you like, use

a setting to the right of the*the next

time you dry a similar load.

If items are not as dry as you like,

use a setting to the left of the * the

next time you dry a similar load.

OVERDRYING CAN CAUSE SHRINKAGE, STATIC CLING

AND DAMAGE TO SOME FABRICS.

Hmed drying

Use the TIMED DRYING Cycle for

any load you want to dry by time. For

example: small loads, large bulky

items, items to be fluffed or dusted

with the FLUFF AIR heat setting.
• Turn the Control Knob to the number

of minutes you want - from 10 to 60.

• The last 10 minutes of this cycle are

without heat — a cool-down time. This

helps make the load easier to
handle.

Advertising
This manual is related to the following products: