Whirlpool 940 - Manual (Page 14)

SETTING THE CONTROLS
Selecting cycle options
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press AIR DRY any time
before the DRYING indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the CANCEL/
DRAIN pad is pressed.
High Temp Wash
When HIGH TEMP WASH is selected, the
dishwasher heats the water during
the main wash of the LOW
ENERGY/CHINA, NORMAL, and
HEAVY cycles. Heating the water
helps improve washing results.
The POT-N-PANS cycle automatically uses
HIGH TEMP WASH.
Air Dry
When AIR DRY is selected, the air in the
H
dishwasher is not heated during
the “dry" portion of a cycle. Using
AIR DRY helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid rinse
agent.
NOTE: The dishwasher automatically
heats the air in the dishwasher during the
“dry" portion of the cycle unless you select
AIR DRY.
Changing a cycle or option setting
During the first minute
of a cycle
1. Press new Cycle and/or Option pads.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
d) CZI
After the first minute
of a cycle
1. Press CANCEL/DRAIN. A 2-minute drain
cycle starts. Wait for drain cycle to finish.
2. Press a new Cycle pad.
3. If desired, press one or rrx>re Option
pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
WASH
LATER CHINA
LOW POTS
ENtRUY I normal HEAVY -N-
PANS
HIGH
TEMP AIR DRY
WASH
14