Compaq Evo D300v Series - Manual (Page 26)

Setup Utility (Intel Pentium 4 Models)
Using Setup Utility
To access the Setup Utility menu, complete the following steps:
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
2. When the Del = Setup message appears in the lower-right corner
of the screen, press the Delete key.
If a second screen appears, follow the prompts to access the Setup
Utility.
If you do not press the Delete key while the message is displayed, you
must restart the computer again to access the utility.
3. Use the Up and Down arrow keys to highlight the item you want to
change in the left portion of the screen. The available options for
that item are listed on the right side of the screen.
4. Press the Page Up or Page Down key to select the desired option. An
arrow shows each option as you select it.
5. When you are finished changing options, press the Esc key to
return to the Main Menu.
6. To apply and save changes, select Save Settings and Exit from
the Main Menu.
❏ To save the configuration changes made with the Setup
Utility, choose Y in the dialog box and press the
Enter key.
The system will restart.
❏ Choose N or press the Esc key to return to the Main Menu
without saving the current settings.
❏ Choose the Exit without Saving option to exit the Setup
Utility without saving any changes.
To change the color of the background screen, press the F2 or F3 key.
To save your changes and exit the Setup Utility at any time, press the
F10 key.
3-2 Compaq Evo D300v User’s Guide