GE 51140 GE Indoor Outlet Receiver Smart Remote Plus Compatible User Manual

Warning, User's manual, Operate a lamp or appliance by remote control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Indoor Receiver Module

User's Manual

Enclosed you will find

(1) Indoor Receiver Module

Any transmitter in the GE SmortHome”

product line is capable of controlling every

receiver-the ultimate in home convenience.

Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.

c®us

LISTED

6/01/06 51140-2

A

WARNING

Risk of electric shock

• Keep children away
• Use indoors only
• Do not use In wet locations

Risk of fire

• Do not exceed electrical ratings

The following GE SmortHome™ transmitters (sold seporotelyl con control THIS receiver:

2

о

.

/

Wkeiess

RemoteTransmitter

RF102TXPS

The transmitters aixve can also control the following GE SmortHome™ receivers (sold separately):

Key Chain Remote

RFIOOTXPS

Complete Home Contd

RF2000KINPS

Mot/on-Sens/ng

Control

RF613TX

I NCI.

UDBD'-

Indoor

Receiver Module

RFIOORXPS

Outdoor

Receiver Module

RF106RXPS

в

Socket Adopter

RF104RXPS

Wall Switch

RF102RXP5

IMPORTANT! These devices are NOT compatible with devices from other ^sterns.

You must purchase GE SmortHome™ transmitters and receivers to ensure compatibility.

Operate a lamp or

appliance by remote control.

Expanding your system

The GE SmortHome” devices operate on any of 8 user-settable channels. The channels are

easy to set/adjust

-

with the simple turn of a knob. Set up your GE SmortHome™ by purchasing

as many transmitters and receivers as you need. The following table is just one example of how

you can configure your GE SmortHome” system:

Area

CH

Transmitters

Receivers

Bedroom

1

Bedside - wireless Remote Transmitter

Entra nee - Wireless Remote Transmitter

(2) Bedside Lamps - (2) Socket Adapters

Corner Torchiere - Indoor Receiver Module

Overhead Light Fixture- Wall Switch

Entertainment System - Indoor Recewer Module

Living Room

2

Coffee Table - Timer/Controller

Entra nee - Wireless Remote Transmitter

(2) End Table Lamps - (2) Socket Adapters

Overhead Light Fixture- Wall Switch

Entertainment System - Indoor Recewer Module

ChristmasTree- Indoor Receiver Module

3

Window Santa - Indoor Receiver Module

Lighted Poinsettia- Indoor Receiver Module

Bosement

4

Entrance - Wireless temóte Transmitter

(4) Overhead Can Fixtures- M SocketAdapters

(21 Fluorescent Rxtures - (2| Indoor Receiver Modules

Goroge

5

Entrance - Wireless temóte Transmitter

(2)Fluaescent Fixtures-(2|Outdoa Receiver Modules

Overhead Light Fixture- Wall Switch

Outdoor

6

Foyer-

Wireless Remote Transmitter

Cor Keys - K^ Chain Remote

EntiyLight-WollSwitch

Coach Lantern-WallSwitch

7

Christmas Lights- Outdoor Recewer Module

Yaid Santa - Outdoor Recewer Module

Kitchen

8

Entrance - wireless Remote Transmitter

Coffee Maker - Indoor Receiver Module

Operating Instructions

FOR INDOOR USE ONLY

1. Remove the small tab on the back of the unit labeled

HOUSE CODE using a small screwdriver.

2. Set the HOUSE CODE to any one of the following settings:

ON

Eg

1

2

A B C D

NOTE Moke sure ALL your GE SmortHome™ devices hove the some HOUSE CODE setting. The

transmitters WILL NOT control the receivers if they hove different HOUSE CODE settings.

IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on /off).
If you experience interference, change the HOUSE CODE on all your GE SmortHome™

transmitters and receivers to a different setting.

3. Replace the HOUSE CODE tab.

4. Set the CHANNEL by using the knob on front as shown.

NOTE: If you set your Indoor Receiver Module to CHANNEL 1,

the unit can be controlled using any transmitter set to CHANNEL 1. If you set your Indoor Receiver

Module to CHANNEL 2, the unit con be controlled using any transmitter set to CHANNEL 2... and so on.

a

IMPORTANT! A transmitter will control o receiver ONLY if they hove the some
HOUSE CODE and CHANNEL settings.

______________________________________________________________________________________________________________________________________ I

fr

'

5. Plug the Indoor Receiver Module into o powered, grounded 125VAC outlet.

i i y i r

6. Plug the lamp / appliance you wish to control into the Indoor Receiver Module as shown.

The following ore examples of devices you can control with your Indoor Receiver Module:

COFFEE MAKER

LAMP

FAN

TORCHIERE CHRISTMAS TREE SURGE PROTECTOR

7. Using any of the transmitters set to the same CHANNEL and HOUSE CODE, test the

installation by using the ON and OFF buttons. An indicator light on the Indoor Receiver Module
lights RED when it receives an ON signal.

CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT OUTLET IS POWERED.

DO NOTCONNEQ/ DISCONNECT DEVICES TO / FROM THE OUTLET ONCE IT IS POWERED.

Specifications

FOR INDOOR USE ONLY

DO NOT EXCEED ELECTRICAL RATINGS

Electrical Rating ......................................................................................... 120V, 60Hz

Maximum Resistive Load ....................................................................................... 1200W
Maximum Tungsten Load ........................................................................................ 600W
Maximum Mator Laad ........................................................................................... 1/3 HP

*Functional range may be adversely affected by one or mae of the following factors: weather radio

frequency interference, low transmitter battery and obstructions between the transmitter and receiver.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and;

2. This device must accept any interference received, including interference that may cause

undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

^ is a trademark of the

General Electric Company

and is used under license ta

Josco Products Company LLC,

311 N.W. 122nd Street,

Oklahama City, OK 73114.

www.jascoproducts.cam.

90 DAY LIMITED WARRANTY; Jasco Products Coinpany warrants this product to be

free from manufacturing defects for a period of ninety days from the original dote of

consumer purchase. This warranty is limited to the repair or replacement of this

product only and does not extend to consequential or incidental damage to other
products that may be used with this unit. This warranty is in lieu of all other

warranties express or implied. Some states do not albw limitations on how long an

implied warranty lasts or permit the exclusion or limitation of incidental or

consequential damages, so the above limitations may not apply to you. This

warranty gives you specific rights, and you may also have other rights which vary
from state to state. If unit should prove defective within the warranty period, return

prepaid with dated proof of purchase to:

Jasco Products Company

311 N.W. 122nd

Oklahoma City, OK. 73114

Advertising