GE 51138 GE Indoor Outlet Receiver with Wall Switch Smart Remote Plus Compatible - Manual

Wireless starter Kit
User's Manual
I
Enclosed you will find
• ID Wall Mount Control [ ^! I
(for mounting)
• ID Indoor Outlet Adapter
The GE Smart Remote Plus advantage
Any transmitter in the GE Smart Remote Plus
product line is capable of controlling every
receiver-the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
c®us
LISTED
A
WARNING
Risk of electric shock
• Keep childien away
• Use indoors only
• Do not usein wet locations
Risk of fire
• Do not exceed electrical ratings
The following GE Smart Remote Plus transmitters (sold separately) can control your receiver:
INC&f«
O
o
Key Cfio/n Remote
RFIOOrXPS
Wall Mount Control
RF102TXPS
Whole-Home Control
RF2000KINPS
Motion-Sensing Control
RF6Î3TX
The transmitters abcwe can also control the following GE Smart Remote Plus receivers (sold separately):
o
INCI
'ciUDÉD!
i
Hi
Q
Outdoor Outfet
RFI06RXPS
Socket >idopter
RF104RXPS
Wall Switch
RF102RXPS
Indoor Outlet
RFIOORXPS
IMPORTANT! These devices are NOT compatible with devices from other systems.
You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.
Operate a lamp or
appliance by remote control.
Expanding your system
The GE Smart Remote Plus devices operate on any of 8 user-settable channels. The channels
are easy to set / adjust - with the simple turn of a knob. Set up your GE SmartHome™ by
purchasing as many transmitters and receivers as you need. The following table is just one
example of how you can oonfigure your Smart Remote Plus system:
Area CH Transmitters Receivers
Bedroom 1 Bedside - Wall Mount Control
Entrance - Wall Mount Control
(2) Bedside Lamps - (2) Socket Adapters
Comer Torchiere - Indoor Outlet Adapter
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Living Room 2 Coffee Table - Timer/Controller
Entrance - Wall Mount Control
(2) End Table Lamps - (2) Socket Adapters
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter
3 Window Santa - Indoor Outlet Adapter
Lighted Poinsettia - Indoor Outlet Adapter
Basement 4 Entrance - Wall Mount Control (4)Ovefhead Can Fixtures- (4) SocketAdapters
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters
Garage 5 Entrance - Wall Mount Control (2) Fluorescent Fixtures - (21 Outdoa Outlet Adapters
Overhead Light Fixture - Wall Switch
Outdoa 6 Foyer-Wall Mount Control
Car Keys- KeyChain Remote
Entry Light-Wall Switch
Coodi Lantern - Wall Switch
7 Christmas Lights- OutdoaOutletAdapta
Yard Santa - Outdoa OutletAdapta
Kitchen 8 Entrance-Wall Mount ControlCoffee Maker - Indoa Outia Adapter
GE is a trademark of the General Electric Company
and is used under license to
Jasco Products Company LLC,
311 N.W. 122nd Street.
Oklahoma City. OK 73114
www.jascaproducts.com.
90 DAY LIMITED WARRANTY: Jasco
Products Company warrants this product
to be free from manufacturing defects for
0
period of ninety days from the original
dote of consumer purchase. This warranty
is limited to the repair or replacement of
this product only and does not extend to
consequential or incidental damage to
other products that may be used with this
unit. This warranty is in lieu of all other
warranties express or implied. Some
states do not allow limitations on how long
an implied warranty lasts or permit the
exclusbn or limitatbn of incidental or
consequential damages, so the above
limitations may not apply to you. This
warranty gives you specific rights, and you
may also have other rights which vary
from state to state. If unit should prove
defective within the wananty period,
return prepaid with dated proof of
purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City. OK. 73114
Operating Instructions -1 ndoor Outlet Adapter
FOR INDOOR USE ONLY
1. Remove the small tab on the back of unit labeled HOUSE CODt
using a small screwdriver.
2. Set the HOUSE CODE to any one of the following settings:
A B C D
NOTE: Moke sure ALL your GE Smart Remote Plus devices hove the some HOUSE CODE setting.
The transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on/off).
If you experience interference, change the HOUSE CODE on oil your GE Smart Remote Plus
transmitters and receivers to a different setting.
3. Replace the HOUSE CODE tab.
4. Set the CHAN N EL by using the knob on front as shown.
NOTE: If you set your Indoor Outlet Adapter to CHAN N EL 1,
the unit can be controlled using any transmitter set to CHANNEL 1. If you set your Indoor Outlet Adapter
IMPORTANT! A transmitterwill oontrol a reoeiver ONLY if they hove the same ©
HOUSE CODE and CHANNEL settings.
5. Plug Indoor Outlet Adapter into a powered, grounded 125VAC outlet.
6. Plug the lamp/ appliance you wish to control into the Indoor Outlet Adapter as showa
The following are examples of devices you can control with your Indoor Outlet Adapter:
C0FFŒ MAKER LAMP FAN T0RŒIERE ŒRISTMASmE SURGE PROTECTOR
CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT OUTLET IS POWERED. DO NOT
CONNECT / DISCONNEa DEVICES TO / FROM THE OUTLET ONCE IT IS POWERED.
Operating Instructions - Wall Mount Control
1. Find the slot labeled HOUSE CODE on the back of the unit.
2. Set the HOUSE CODE to any one of the following settings:
3. Set the CHAN N EL by using the knob on front as shown.
ON
1 2
ON
1 2
ON
1 2
NOTE: If you set your Wall Mount Control to CHAN NEL1, the unit can control
any receiver set to CHANNEL L If you set your Wall Mount Control to
CHANNEL 2, the unit can control any receiver set to CHAN NEL 2... and so on.
4. Mounting
NOTE: Mounting the Wall Mount Control on masonry or metal walls may degrade the functional
range.
Tape Mounting
A. Make sure surfaces are free of dust, oil and other substances that could affect adhesion.
B. Attach the double-sided tape to back of the Wall Mount Control housing
C. Press tape firmly to the mounting surface.
Screw Mounting
A. Using a slotted screwdriver, remove the faceplate of the Wall Mount Control.
B. Place the detached back plate where desired and mark screw locations
C. Insert the mounting screws into the back plate holes and screw into place.
D. Replace the Wall Mount Control faceplate.
5. Use the toggle button to activate the Wall Mount Control (ON/OFF operation). Make sure
to press firmly and for a minimum of 1 second for best results. An indicator lights RED when
a signal is sent.
6. Using any of the receivers set to the same CHANNEL and HOUSE CODE, test the installation by using
the ON and OFF buttons.
If your unit does network properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web at www.GESmartHome.com
to download application notes, manuals and to find out more about the GE SmartHome™ product line!
Specifications - Wall Mount Control
Battery Type_________________________ Use ONLY A23 (12V) Alkaline
NOTE: The functional range will decrease as the battery wears out so make sure to replace the
battery every 6 months for best results.
Specifications - Indoor Outlet Adapter
FOR INDOOR USE ONLY
DO NOT EXCEED ELECTRICAL RATINGS
Electrical Rating ____________________________________ 120V, 60Hz
Maximum Resistive Load ________________________________ 1200W
Maximum Tungsten Load ________________________________ 600W
Maximum Motor Load __________________________________ 1/3HP
*Functional range may be adversely affected by one or more of the following factors: weather, radfo
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions:
L This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Made in China for GE Home Electric Products,