B.2.2 installing the dram simm, Simm slot locations, Figure b-2 – Cabletron Systems 6H258-17 User Manual
Page 54
Advertising
SIMM Upgrade
B-4
Switch Settings, Upgrades, and Installations
Figure B-2
SIMM Slot Locations
B.2.2
Installing the DRAM SIMM
To install a DRAM SIMM, refer to
and proceed as follows:
1.
With the SIMM alignment notch oriented as shown in
, insert the SIMM down
between the connector teeth.
2.
Pivot the SIMM downward so the connector clips align with the two side notches of the SIMM
and the connector clips lock the SIMM into place.
!
CAUTION
Observe all antistatic precautions when handling sensitive electronic equipment.
DRAM SIMM
Advertising
This manual is related to the following products: