Water, Using your iron – GE 106761 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 4 0 0 7 7 0 0 0 E v 0 3 1 1 / 9 / 0 0 1 0 : 2 6 A M P a g e 4
€>■
Using Your Iron
To Dry Iron
1. Plug iron into outlet.
2. Set the Adjustable Steam Switch
to
0
(the Dry
Iron position).
3. Turn Temperature Control Dial
to desired
temperature.
Allow two
minutes for iron
to reach desired
temperature.
4. To turn iron Off, turn Temperature
Control Dial to Off and unplug iron.
To Steam Iron
1. Unplug iron. Using a cup, slowly
pour 6 ounces
(% cup) of tap
water into water
tank opening.
Do not fill iron
direcdy from
the faucet.
2. Plug iron into oudet.
3. Turn the Temperature Control Dial
to desired fabric
setting in the
steam range. Set
the Adjustable
Steam Switch to
the recommended
steam level. See
“Fabric Setting
Chart” on page 5.
4. Allow two minutes for the iron to
reach desired temperature.
5. To turn iron off, set Adjustable Steam
Switch to
0
(Dry Iron). Turn the
Temperature Control Dial to Off.
Unplug iron.
6. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.