CLIFFORD Eagle II - Manual (Page 16)

Feature
Factory
setting
# of
flicks and
chirps
Secondary
action
Program
completion
confirmation
Result
Add a New
Remote to
Channel 3
(silent
arm/disarm)
— 15 Press remote control button 3 3 chirps
Button 3/channel 3 code
of the new remote control
has been memorised
Add a New
Remote to
Channel 4
(remote
accessory)
— 16 Press remote control button 4 4 chirps
Button 4/channel 4 code
of the new remote control
has been memorised
Add a New
Remote to
Channel 5
(remote
valet mode)
1sec. 17
Transmit channel 5
(LevelShift button once,
then button 1)
5 chirps
Channel 5/remote valet code
of the new remote control
has been memorised
Erase all
channels
— 19 — 2 chirps
All channels have been
erased, program in new
remote control(s)
Adding new remote controls
For other drivers in your family, or if you wish to control Eagle II systems on your
other cars with the same remote control, you can buy additional remote controls
from any Authorised Clifford Dealer and program them into the system yourself.
Each Eagle II will respond to as many as four 4-button/12-channel ACG remote
controls. To add a new remote control to the system, use the procedures noted in the
User-selectable features section on pages 14-15.
How to erase the codes of lost or stolen remote controls
If one of your remote controls is ever lost or stolen, you can erase its digital codes
from the system memory to make sure that the missing remote control can never be
used to disarm your system. To do so, use the “Erase all channels” feature (see
User-selectable features on pages 14-15). This will clear all remote control codes
from the system memory. Then simply program each remaining and/or replacement
remote control as noted in the Adding new remote controls section above.
© Copyright Clifford Electronics, Inc., 1996 31-084D/E2OM/496