D, power failure indicator, B. power failure indicator, Clock radio operation – GE 2-9710 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLOCK RADIO OPERATION
The GE Model 2-9710 Clock Radio Telephone provides good
sound quality with its AM/FM radio. In addition, it provides
convenient alarm features, such as wake-to-radio, wake-to-
aiarm, sieep-to-music and snooz alarm.
A.
Introduction
When AC power is interrupted (disconnected) for a short
period, both time and alarm settings will change (unless
optional battery is installed).
After AC power ¡s restored
D, Power
Failure
indicator
(reconnected) the
DIGITAL DISPLAY
will blink to indicate that
nnvA/pr wp<; intPrriintpH pnH unii
rppHii/^t
thp TIMF and
ALARM
settings. To stop display from blinking, press
TIME
SET
button and
HOUR
or
MINUTE
button at the same time.
(See 'WO
WORRY'’ BATTERY BACKUP SYSTEM.)
T
Note: Radio and alarm will not operate if telephone
handset is out of cradle.
1. Turn the
FUNCTION SELECTOR
to
ON.
2. Select AM or FM broadcasts using the
BAND
switch.
3. Select a station with
TUNING
Wheel and adjust the
VOLUME
CONTROL
to your preferred listening loudness.
Turn radio
OFF
by turning the
FUNCTION SELECTOR
to
OFF.
C.
Radio
Operation
4.
When the telephone handset is removed from the cradle, the
radio’s audio Is automatically muted, eliminating' the need to
manually reduce radio volume to carry on a conversation.
The
HANDSET
must be returned to the
BASE
for radio
D.
Automatic
Radio
Muting
play and alarm sysiem uperaiiuri.
The built-in Automatic Frequency Control (AFC) works to
rariitna
Hrift nn FM rp/^pntir>n anH hpln« kppn thp radio
locked in on the station to which it is tuned. AFC works only
on FM.
18