Install the air conditioner in the case, Install the air conditioner in the case (cont.) – GE AEE08AR User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Window Installation Instructions
INSTALL THE AIR CONDITIONER IN
THE CASE
0 slide the air conditioner into the case by the base
pan. Do not push on the controls, styrofoam air
discharge housing or the finned coils. Make sure the
air conditioner isfirmly seated.
Do not press on
these areas—
damage to the unit
may result
U
Replace the 2 screws removed earlier, one on each
side of the case.
IMPORTANT: THE GROUND SCREWS MUST BE
REINSTALLED TO ENSURE PROPER GOUND.
INSTALL THE AIR CONDITIONER IN
THE CASE (CONT.)
Attach the front grille to the case by inserting the
tabs on the grille into the slots on the front top of
the case. Push the grille in.
0 Secure the front grille to the case by replacing the
2 screws removed earlier. Press on the top of the
grille to help with side screw installation.
II
1
^
Connect power.
12