The promem solver – GE DDE0580G User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The ProMem Solver
(continued)
PROBLEM
POSSIBLE CAUSE AND REMEDY
WRINKLÍNGÍN
PERMANENT PRESS
AND “NO~IRON”
ITEMS (continued)
® Accumuiation of lime scale due to use of carbonate detergents, if you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
® Failure to use fabric softener. Proper use of fabric softener will minimize wrinkling.
Tb remove wrinkles:
,
1. Retumble on “Permanent Press” setting.
2. Rerinse and dry on “Permanent Press” setting.
3. If unsuccessful, retumble on normal heat for 10-12 minutes and hang immediately.
4. Iron carefully.
5. Send to dry cleaners for pressing.
6. Some wrinkles may remain which cannot be remoyedf
■ •
.
^ '
*NOTE: If you follow good laundry procedures and Permanent Press clothes still come
out wrinkled, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease ofPermanent Press performance will result.
If you need more help... call, toll free:
The GE Answer Center®
consumer information service
■ ■
-- -