4G Systems XSJack T3e - Manual (Page 22)

22
decide what to do and may also control the monitoring function from
remote by entering the codes
L1, L2, L3 (will do a recalibration here),
L4 or L6. The latter makes it possible not only to listen to the audio at
home but also to talk back which is initially disabled. Talking back may
only make sense when using a hands-free telephone with loudspea-
ker.
During monitoring, all incoming calls will be rejected except for calls
received from the configured destination number. This makes it possi-
ble not only to be called by the device but also to call the device
directly to check the acoustic environment. This is where sensitivity
level 0 may be useful if you only want to establish calls to the
XSJackT3 and don't want to be called by the device.
If acoustic monitoring mode is active, the XSJackT3 will not generate
any tones to make sure not to wake anyone up when using the function
as a babyphone. The mode will also continue operation after power
loss. No other functions such as telephony, fax, SMS or entering codes
for other services are possible during monitoring. Entering code
L4
quits acoustic monitoring mode and gets back to normal operation.
Description Format Example
L1
Set sensitivity (0 - 5)
and destination number * 20 * SENS *
NUMBER # * 20 * 3 *
01721234567 #
L2
Only change sensitivity * 20 * SENS # * 20 * 3 #
L3
Start monitoring * 20 # * 20 #
L4
Stop monitoring # 20 # # 20 #
L5
Query monitoring * # 20 # * # 20 #
L6
Enable both-way
talking **## **##