Filter replacement coni, Cleaning the unit, Storage – Kenmore HEPA 152.85254 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FILTER REPLACEMENT
coni
7. Adjust the filter change wheels to properly indicate when the
next filter change is necessary.
8. Turn the Air Cleaner upright and plug it into an outlet for operation.
r
NOTE:
Model 85254 has a built-in ionizer which additionaily
helps clean, freshen and revitalize the air.
CLEANING THE UNIT_____________ ______________________
A
w
ARNING:
To avoid
serious
injury from electric shock ALWAYS
turn the air cleaner OFF and disconnect the plug from the outlet
BEFORE cleaning.
1. Turn Air Cleaner OFF and unplug from outlet.
2. Clean unit with a moistened soft cloth only.
DO NOT
pour
or splash water on the unit or use any abrasive-type cleaner
on it. Clean all external surfaces, especially the air intake
grilles and air outlet.
3.
DO NOT
attempt to clean the pre-filter or HEPA filter; they
ARE NOT
washable and washing will damage them.
4. Reposition Air Cleaner plug into power outlet and turn ON.
STORAGE________________________________________________
If you store your Air Cleaner for more than 30 days you should:
1. Remove both the HEPA filter and the pre-filter from the unit.
2. Discard the pre-filter.
3. Wrap the HEPA filter in an air-tight plastic bag or plastic wrap. Be sure
that the filter is totally sealed to protect it from its storage environment.
4.
DO NOT
put the plastic-wrapped HEPA filter back into the air cleaner.
5. To restore the Air Cleaner to service:
• Unwrap the HEPA filter.
«Install a new charcoal pre-filter.
• Install filter assembly in the air cleaner. See “Filter
Replacement” section for proper installation.