Step 3: install faucet (cont.) – Kenmore 625.385700 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
- STEP 3: INSTALL FAUCET (cont.)-
B. ASSEMBLE FAUCET
ULTRAFILTER 150
1. Loosely assemble the base, spacer, washer and
plastic nut onto the faucet stud.
2. Route the 1 / 4" red tubing through the sink or
countertop hole and connect to 1/4" barb on faucet.
3. Route the 3/8" black tubing through sink or the
countertop hole and connect to 3/8" barb on faucet.
4. Attach the 3/8" blue tubing to the faucet stud us
ing the tubing adaptor.
5. Lower faucet into place on the countertop, on the
underside of the countertop or sink slide the slotted
washer into place and tighten plastic nut. Tighten
the nut so the faucet cannot move, but do not over
tighten.
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line