FRIGIDAIRE FRA186MT2 - Manual (Page 2)

Installation Instructions
4. Check for anything that could block airflow
Check area outside of window for things such as shrubs, trees, or awnings,
wiii not stop proper air flow.
5. Check the available electrical service
Power supply must be the same as that shown on the unit sériai
namepiate. (See Use & Care Guide for sériai piate location.) Power
cord is 48" iong. Be sure you have an outlet near.
All models have a 3-prong service plug to provide proper service and
safe positive grouding. Do not change plug in any way. Do not use an
adapter plug. If your present wall outlet does not match your plug, call
a qualified electrician to make the needed change.
6. Carefully unpack air conditioner
Remove all packing material. Protect floor or other stable flat surface
with covering to prevent scratches from unit. With the aid of an
assistant, remove unit from styrofoam base and rest on protected
surface. Move and install unit with the aid of an assistant. Save
packing and shipping box for future unit storage.
Inside, be sure furniture, drapes, or blinds
Accessory Kit includes
• Hardware bag(shipped inside
window support brackets)
• Foam gasket
• Window support bracket (2) • Window sash seal
• Side retainer (2) • Bottom rail seal
• Window Filler Panel (2) * Top angle rail
* MEDIUM models only
HEAVY DUTY top angle rail can be found in carton base
packaging (FIG.3)
Tools Required
• a large flat blade screwdriver • tape measure
• adjustable wrench or pliers • pencil
• level • Socket wrenches
• Phillips screwdriver
WARNING Avoid fire hazard or electric
shock. Do not use an extension cord or an
adaptor plug. Do not remove any prong
from the power cord.
Grounding Prong
Do not, under any
circumstances, cut,
remove or bypass the
grounding prong.
HEAVY DUTY
(22,000~28,500BTU)
TOP ANGLE RAIL
FIG.3
Hardware ( in plastic bag)
Qty. Hardware ( in plastic bag) Qty.
I©
7/16" Locking Screw and Flat
Washer for window filler panels
2 ea Sill Angle Bracket
2
1/2" Long hex head screw 7
Long hex-head locking screw for top
B angle rail, side retainer 5/16" long
10
Safety Lock
1
Safety Lock
(for Vinyl-Clad window)
2
1/2" Long Screw
and locknut
4 ea
f Locking screw #10 X 1/4" panhead
Phillips screws (for Vinyl-Clad window)
2
Si 3/4" Long Flat Head Bolt
and Locknut
2 ea
^ weather seals
(6"X3/4"X1 /12")
5
foam insert 2