FRIGIDAIRE FHWC3060LS User Manual
FRIGIDAIRE Kitchen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i
0.90 FROM CEILING
T
4.90
9.80
UPPER DUCT COVER MOUNTING TEMPLATE
CUT ALONG THIS LINE
UPPER MOUNTING BRACKET
- ITEM # 4
CEILING
( cut on this line to locate templates
at ceiling location.)
USE 3/16" DRILL
INSTALL WITH ITEMS # 10 & 11
2 PLACES
Note: Place this template in ceiling corner to mount
upper bracket for chimney cover.
USE 3/16" DRILL
INSTALL WITH ITEMS # 10 & 11
2 PLACES
MOUNT BRACKET WITH NOTCH UP
9.13
NOTE:
LOWER DUCT COVER MOUNTING BRACKET - ITEM # 5
RANGE HOOD LOCATION INSTRUCTIONS:
- LOCATE CENTER OF COOKTOP
- DRAW VERTICAL LINE ON WALL TO CEILING
- FROM INSTALLATION GUIDE CHART - DETERMINE DESIRED
VENT HOOD HEIGHT
- DRAW HORIZONTAL LINE AT THIS HEIGHT
- LOCATE AND TAPE TEMPLATE TO THE WALL FOR PROPER
INSTALLATION
- REFER TO INSTALLATION MANUAL FOR PROPER ASSEMBLY
LOWER AND UPPER MOUNTING HOLES ON RANGE HOOD
BODY SHOULD BE ATTACHED TO WOOD STRUCTURE TO
SUPPORT 150 LBS.
REFER TO INSTALLATION GUIDE FOR DETAILS
UPPER MOUNTING HOLES
USE 1/8" DRILL
INSTALL WITH ITEM # 14
2 PLACES
LOWER MOUNTING HOLES
USE 1/8" DRILL
INSTALL WITH ITEM # 14
2 PLACES
2.09
BOTTOM OF RANGE HOOD-
( cut on this line to locate templates
at correct installation height.)
CENTERLINE OF PRODUCT LOCATION SHOULD
MATCH CENTER OF COOKTOP
RANGE HOOD MOUNTING TEMPLATE FOR: FHWC3060LS
FHWC3660LS
PN:316902460