Kenmore HE3 110 - Manual (Page 15)

^ ■ ■ ■ ■ ■ ■ ■ -TIS
You can customize your wash by adding OPTIONS to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.
O ptions
Preset cycle settings of Wash/Rinse Temp, Water Temp, Spin
Speed, and Soil Level can be changed. You can change a
modifier after starting a cycle anytime before the seleoted
modifier begins. Not all Modifiers are available with all options
and cycles,
MODIFIERS
PREWASH
2 md R inse
E xtended S pin
■ See the “Laundry Guide” section for an overview of possible
options for each Wash Cycle selection.
■ You can select more than one option for a cycle. Some
options cannot be added to some cycles.
■ If an option is available with a selected cycle, the light for that
option will glow when selected.
■ If an option is unavailable with a selected cycle, there will be a
short tone, and the light for that option will not glow when
selected.
Prewash
Use this option for loads of heavily soiled garments that need
pretreatment.
■ Add detergent to the detergent compartment of the
Dispenser Drawer.
This option adds tumbling time prior to the selected main cycle.
The washer continues automatically from prewash into the main
wash cycle.
2nd Rinse
A second rinse can be used to ensure the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse.
Extended Spin
Use this option to add an additional spin to any cycle to improve
the “fluff” of your laundry, to reduce drying time, and to save
energy.
A uto T emp C ontrol • HIGH
m
HOT/C old • M edium
• WARM / WARM • Low HIGH
• W arm / C old • extra low m LOW
• COLD / COLD • No S pin m O ff
o
WATER T emp
WASH/RINSE
O
S pin S peed
о
E nd of C ycle S ignal
To change the water temperature, select the WATER TEMP
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
' HEAVY
> NORMAL
• L ight
SOIL LEVEL
■ To change cycle time, select SOIL LEVEL button.
■ To change the loudness of the End of Cycle Signal, select
END of CYCLE SIGNAL.
Wash/Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest water safe for fabrics. Follow garment
label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
HOT
122°F (50°C) or above
Whites and pastels
Heavy soils
WARM
104°F(40°C)
Bright colors
Moderate to light soils
COLD
77°F (25°C)
Colors that bleed or fade
Light soils
In wash water temperatures colder than 70°F (21 °C), detergents
do not dissolve well. Soils may be difficult to remove.
15