Convection roast, Note, Setting oven controls – Kenmore ELITE 790-4501 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Convection Roast

Convection roast combines a cook cycle with the convection

fan

and element to rapidly roast meats and poultry. Heated

air circulates around the meat from all sides, sealing in

Juices and flavors. Meats cooked with this feature are crispy

brown on the outside while staying moist on the inside. In

addition, there is no need to reduce the oven temperature

when using convection roast.

Convection roast may be set with the following options:

• Cook time or cook time with delay start

The following temperature settings apply to convection

roast:

• Factory auto-start default:

350°F/177°C

• Minimum:

170°F

/

77°C

• Maximum:

550°F

/

288°C

Benefits of convection roast:

• Superior multiple oven rack performance.

• Some foods cook up 25 to 30% faster, saving time and

energy.

• No special pans or bakeware required.

For best results

• Preheating is not necessary for most meats and poultry.

• Be sure to carefully follow your recipe’s temperature and

time recommendations or refer to the convection roast

chart for additional information.

• Do not cover foods when dry roasting - this will prevent

the meat from browning properly.

• Since Conv Roast cooks food faster, reduce the cook time

by 25% from the recommended cook time of your recipe

(check the food at this time). If necessary, increase cook

time until the desired doneness is obtained.

Setting Oven Controls

See example below to set convection roast to start

immediately with the auto-suggest (default) setting:

1. Press

CONV ROAST

If needed, use numeric keypads to enter a different oven

temperature.

2. Press

START

Once START is pressed the oven will begin heating.

NOTE

You may press

STOP

any time when setting the control or

during the cooking process.

Roasting rack instructions

The broil pan, its insert and the roasting rack are available

via the mail order card. When preparing meats for

convection roasting, you may use the broiler pan, insert and

the roasting rack supplied with your appliance. The broiler

pan will catch grease spills and the insert will help prevent

grease splatters. The roasting rack

fits

on top of the insert

allowing the heated air to circulate under the food for even

cooking and helps to increase browning on the underside.

1.

Place oven rack on bottom or next to the bottom oven

rack position.

2.

Place the insert on the broiler pan.

3.

Make sure the roasting rack is securely seated on top of

the insert.

Do not

use the broiler pan without the insert.

Do not

cover the insert with aluminum foil.

4.

Position food (fat side up) on the roasting rack. -Fig. 1­

5. Place prepared food on oven rack in the oven.

Roasting rack

■ Insert

Broil pan

Meat

Weight

Oven temp

Internal temp

Minute per lb.

Beef

Standing rib roast

4 to 6 lbs.

350°F

%

25-30

Rib eye roast

4 to 6 lbs.

350°F

%

25-30

Tenderloin roast

2 to 3 lbs.

400° F

%

15-25

Poultry

Turkey, whole* **

12 to 16 lbs.

325° F

180°F

8-10

Turkey, whole**

16 to 20 lbs.

325° F

180°F

10-15

Turkey, whole**

20 to 24 lbs.

325° F

180°F

12-16

Chicken

3 to 4 lbs.

350° F - 375°F

180°F

12-16

Pork

Ham roast, fresh

4 to 6 lbs.

325° F

160°F

30-40

Shoulder blade roast

4 to 6 lbs.

325° F

160°F

20-30

Loin

3 to 4 lbs.

325°F

160°F

20-25

Pre-cooked ham

5 to 7 lbs.

325°F

160°F

30-40

* For beef: med rare 145°F, med 160°F, well done 170°F

** Stuffed turkey requires additional roasting time. Shield legs and breast with foil to prevent overbrowning and drying of the skin.

19

Advertising